Aimon PS/XB all-in-one Driver Installation
Before you start:
The Aimon product support 3 modes to work on both PC and console, they are PC Mode, Setup Mode and Console Mode. The PC Mode allows you to work with your Aimon as a normal PC mouse with extra left hand WAND. The Console mode is for playing your game on console; The Setup Mode is for your configuration and update firmware.
Console Mode: Plugin to console directly.
PC Mode: Plug into PC USB port directly.
Setup Mode: Press and hold the dongle button while plugin to you PC USB port (Need Driver installed).
Please note: DO NOT hold the dongle button for more than 2 seconds.
Click the driver download link below to download driver installer, save it to any directory you prefer. Depending on what your Windows system, choose the 32bit or 64bit driver version:
All in One driver:
For Aimon PS/XB,Aimon PS/XB Elite and Aimon XB EliteV :
>> Aimon Driver Installer 32bit (2012-07-24) - Window XP, Vista (32bit) or Win7 (32bit)
>> Aimon Driver Installer 64bit (2012-07-24) - Vista (64bit) or Win7 (64bit)
Older driver for Aimon PS/XB and Aimon PS/XB Elite:
>> Aimon All-In-One Driver Installer 32bit (2011-11-22) - Windows XP, Vista(32bit) or Win7(32bit)
>> Aimon All-In-One Driver Installer 64bit (2011-11-22) - Vista(64bit) or Win7 (64bit)
Click on the PDF icon below to downlad the driver installation guide in PDF format:
Driver Installation Guide
1. DO NOT plug in your receiver dongle before install driver.
Click and run the Aimon Driver installer file.
Except in Windows XP, you have to run the Aimon Driver Installer as "ADMINISTRATOR" user when you are in other windows
Press "Next to" continue
Press "Install" to continue
2. Follow the prompt message, press and hold the receiver dongle button while plug into your PC USB port in Setup Mode.
The system will install driver for your Receiver, wait until it is finished, then go the next step.
You may prompt to re-plugin dongle depending on the system, follow the prompt as below.
3. Windows will verify the software publisher, select the “Install this driver software anyway”.
4. Now you driver installation is finished.
To verify the driver is installed properly:
Right click on “My Computer” -> "Properties” -> "Device Manager” -> “Human interface devices", depending on which product
it is, you should find the product name “AIMON PS(TM)”, "AIMON PS ELITE(TM)", "AIMON XB(TM)" or "AIMON XB ELITE(TM)”
appeared. Now your driver is installed properly.
If you dont' find that the device name appears in "Human Interface Device” category, your driver is not installed correctly,
try again from the beginning or contact our support team for assistance.